Safety 1st Comfy Cushy Infant Bath Cradle, Blue/White 1 ea

Cradle Your Child in Comfort During Bath Time

• Contoured, soft foam insert supports child for comfy bathing
• Easily placed in sink, infant tub or adult tub
• Folds flat for easy storage

Age:  0-6 Months
Maximum Weight:  25lbs (11.3kg)

Meets or exceeds Federal Safety Standards

(800) 544-1108

Made in China

*Actual product styling and colors may vary.

Drowning hazard.  Always keep infant within adult's reach.  Never lift this product with an infant in it.  Always keep the drain open in an adult bathtub or sink.  Infants can drown in as little as 1 inch of water.  Always bathe your baby using as little water as necessary.  Never allow other children to substitute for adult supervision.  Always test the temperature of the water before using on baby.  Infant bath water is typically 90-100°F (32.2-37.8°C).  Do not allow water to exceed 100°F.  Never leave infant unattended.  Always lock leg into place before placing infant in product.  Discontinue use if product becomes damaged, disassembled or broken.

Remove all contents from packaging and discard packaging, and/or poly bags.  Lay out and identify all parts.  Set up for use:  Unfold leg:  Pull leg away from base until it clicks/locks into position.  Ensure that leg is locked into position by gently pulling leg toward foot end of cradle.  Never use product without unfolding the leg and ensuring that the leg is locked in place.  Note:  Ensure that foam is securely attached to the frame on all sides, and that the Safety 1st logo is at the foot end of the cradle.  Use in sink or tub:  Assembled cradle can be used in a single sink or adult tub.  Minimum sink size:  14" x 26" (35cm x 66cm).  Do not use in double sinks.  Ensure that cradle rests securely on the bottom of the sink or tub.  do not prop cradle up on the edge of sink or tub.  Test water temperature before washing baby.  To store bath cradle:  Fold leg for storage.  Remove baby from bath cradle.  Drain excess water from bath cradle into sink or tub.  Pull both tabs at the same time to release leg and then rotate leg to the folded position for storage.  Hint:  You may find it easier to press both tabs at the same time when the cradle is face down.  Care and maintenance:  To clean foam and plastic parts:  Remove foam from base.  Wipe with soft cloth dampened with warm soapy water.  Allow all parts to dry thoroughly.  Re-attach foam to base, with the Safety 1st logo at the foot end of cradle.